2sc4853a no. a1076-1/8 features ? low-voltage, low-current operation : f t =5ghz typ (v ce =1v, i c =1ma) : ? s21e ? 2 =7db typ (f=1ghz) : nf=2.6db typ (f=1ghz) speci cations absolute maximum ratings at ta=25c parameter symbol conditions ratings unit collector-to-base voltage v cbo 12 v collector-to-emitter voltage v ceo 6v emitter-to-base voltage v ebo 1.5 v collector current i c 15 ma collector dissipation p c 90 mw junction temperature tj 150 c storage temperature tstg --55 to +150 c package dimensions unit : mm (typ) 7023a-009 ordering number : ENA1076A 80812 tkim/d2408ab msim tc-00001797 sanyo semiconductors data sheet 2sc4853a npn epitaxial planar silicon transistor low-voltage, low-current high-frequency ampli er applications http://www.sanyosemi.com/en/network/ product & package information ? package : mcp ? jeita, jedec : sc-70, sot-323 ? minimum packing quantity : 3,000 pcs./reel packing type: tl marking electrical connection cn lot no. lot no. r a n k tl 1 : base 2 : emitter 3 : collector sanyo : mcp 3 12 2.0 0.425 0.425 0.3 0.65 2.1 0.9 1.25 0.3 0.2 0 to 0.08 0.15 2sc4853a-4-tl-e 3 2 1
2sc4853a no. a1076-2/8 electrical characteristics at ta=25c parameter symbol conditions ratings unit min typ max collector cutoff current i cbo v cb =5v, i e =0a 1.0 a emitter cutoff current i ebo v eb =1v, i c =0a 10 a dc current gain h fe v ce =1v, i c =1ma 60* 270* gain-bandwidth product f t v ce =1v, i c =1ma 5 ghz output capacitance cob v cb =1v, f=1mhz 0.6 1.0 pf forward transfer gain ? s21e ? 2 1v ce =1v, i c =1ma, f=1ghz 4.5 7 db ? s21e ? 2 2v ce =2v, i c =3ma, f=1ghz 10.5 db noise figure nf1 v ce =1v, i c =1ma, f=1ghz 2.6 4.5 db nf2 v ce =2v, i c =3ma, f=1ghz 1.9 db * : the 2sc4853a is classi ed by 1ma h fe as follows : rank 3 4 5 h fe 60 to 120 90 to 180 135 to 270 ordering information device package shipping memo 2sc4853a-4-tl-e mcp 3,000pcs./reel pb free collector current, i c -- ma gain-bandwidth product, f t -- ghz f t -- i c cob -- v cb collector-to-base voltage, v cb -- v output capacitance, cob -- pf itr07583 f=1mhz 35 2 1.0 7 35 5 2 0.1 7 72 10 1.0 0.1 2 3 5 7 5 7 2 itr07582 23 23 5 57 7 10 1.0 2 7 10 1.0 5 7 5 3 2 2 3 v ce =2v 1v h fe -- i c collector current, i c -- ma dc current gain, h fe collector-to-emitter voltage, v ce -- v i c -- v ce collector current, i c -- ma 7 10 5 3 2 7 5 3 2 1000 100 it14233 v ce =2v 1v 1.0 3 257 0.1 3 25 23 7 10 8 12 4 20 16 10 14 6 2 18 0 0 it14232 12 4 356 i b =0 a 15 a 30 a 60 a 45 a 75 a 90 a 105 a 135 a 150 a 120 a
2sc4853a no. a1076-3/8 ? s21e ? 2 , nf -- db ? s21e ? 2 , nf -- v ce collector-to-emitter voltage, v ce -- v 6 5 2 4 1 0 7 3 0 6 4 2 8 10 12 14 f=1ghz itr07586 i c =3ma 1ma i c =1ma 3ma nf ? s21e ? 2 ? s21e ? 2 -- i c collector current, i c -- ma forward transfer gain, ? s21e ? 2 -- db itr07584 0 14 12 10 8 6 4 2 7 1.0 23 23 5 57 f=1ghz v ce =2v 1v collector current, i c -- ma noise figure, nf -- db nf -- i c 35 5 2 3 2 1.0 7 72 10 0 2 4 6 8 10 f=1ghz itr07585 v ce =1v 2v collector dissipation, p c -- mw p c -- ta ambient temperature, ta -- c 100 0 60 80 90 40 20 50 70 30 10 20 060 40 80 100 140 120 160 it14234
2sc4853a no. a1076-4/8 s11e f=200mhz to 2000mhz(200mhz step) s21e f=200mhz to 2000mhz(200mhz step) s12e f=200mhz to 2000mhz(200mhz step) s22e f=200mhz to 2000mhz(200mhz step) j50 j25 j10 0 10 --j10 --j25 --j50 --j100 --j150 --j200 --j250 j100 j150 j200 j250 100 150 250 90 120 150 180 --150 --120 --90 --30 --60 0 60 30 6 8 4 2 0.2ghz 0.2ghz 2.0ghz 90 120 150 180 --150 --120 --90 --30 --60 0 60 30 0.05 0.15 0.20 0.10 j50 j25 j10 0 0.2 0.5 --j10 --j25 --j50 --j100 --j150 --j200 --j250 j100 j150 j200 j250 20 100 2.0ghz 10 itr07588 itr07589 itr07590 itr07591 25 0.2ghz 2.0ghz 2.0ghz 0.2ghz 50 0.2ghz v ce =1v i c =1ma v ce =2v i c =3ma v ce =1v i c =1ma v ce =2v i c =3ma v ce =1v i c =1ma v ce =2v i c =3ma v ce =1v i c =1ma v ce =2v i c =3ma s parameters
2sc4853a no. a1076-5/8 s parameters (common emitter) v ce =1v, i c =1ma, z o =50 freq(mhz) ? s11 ? s11 ? s21 ? s21 ? s12 ? s12 ? s22 ? s22 200 0.940 -17.9 3.228 159.6 0.058 77.1 0.972 -12.2 400 0.863 -33.7 2.983 143.7 0.107 66.6 0.914 -22.7 600 0.778 -48.0 2.732 129.9 0.145 58.1 0.844 -31.7 800 0.698 -60.5 2.469 117.7 0.173 50.9 0.773 -39.6 1000 0.608 -73.5 2.320 106.2 0.195 45.4 0.717 -46.0 1200 0.546 -84.7 2.106 96.3 0.210 40.9 0.668 -51.7 1400 0.470 -96.2 1.977 87.1 0.129 37.6 0.624 -56.5 1600 0.418 -106.4 1.826 78.8 0.224 35.3 0.590 -60.6 1800 0.388 -117.3 1.700 72.2 0.230 33.8 0.562 -64.3 2000 0.354 -127.0 1.615 65.9 0.234 32.9 0.546 -67.5 v ce =2v, i c =3ma, z o =50 freq(mhz) ? s11 ? s11 ? s21 ? s21 ? s12 ? s12 ? s22 ? s22 200 0.839 -30.6 7.428 149.3 0.050 71.4 0.916 -18.3 400 0.672 -53.7 6.016 128.5 0.083 60.6 0.778 -30.2 600 0.536 -71.7 4.908 113.6 0.105 55.1 0.672 -37.1 800 0.431 -85.7 4.073 101.9 0.121 52.5 0.597 -41.9 1000 0.360 -99.0 3.494 92.7 0.135 51.4 0.548 -45.7 1200 0.310 -111.4 3.033 84.4 0.150 50.9 0.514 -49.2 1400 0.265 -122.6 2.694 77.4 0.162 50.9 0.492 -52.3 1600 0.242 -134.7 2.422 70.9 0.175 51.0 0.475 -55.6 1800 0.228 -148.0 2.205 65.9 0.189 51.1 0.461 -59.0 2000 0.217 -157.2 2.061 60.8 0.205 51.0 0.456 -61.8
2sc4853a no. a1076-6/8 embossed taping speci cation 2sc4853a-4-tl-e
2sc4853a no. a1076-7/8 outline drawing land pattern example 2sc4853a-4-tl-e mass (g) unit 0.006 * for reference mm unit: mm 0.65 0.65 2.1 0.7 1.0
2sc4853a ps no. a1076-8/8 this catalog provides information as of august, 2012. speci cations and information herein are subject to change without notice. any and all sanyo semiconductor co.,ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. the products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. if you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. if there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. specifications of any and all sanyo semiconductor co.,ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer ' s products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer ' s products or equipment. sanyo semiconductor co.,ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo semiconductor co.,ltd. products described or contained herein. regarding monolithic semiconductors, if you should intend to use this ic continuously under high temperature, high current, high voltage, or drastic temperature change, even if it is used within the range of absolute maximum ratings or operating conditions, there is a possibility of decrease reliability. please contact us for a confirmation. sanyo semiconductor co.,ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. it is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo semiconductor co.,ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of sanyo semiconductor co.,ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo semiconductor co.,ltd. product that you intend to use. upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of sanyo semiconductor co.,ltd. or any third party. sanyo semiconductor co.,ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above.
|
